Topic: IP the camera on hi3518e. To install tcp to serial. (ser2net).
In the camera of this is/dev/ttyS000 and outputs tx and rx on a board.
Is telnet on 23.
If to write echo ' aaa '>/dev/ttyS000 I receive "" on an output uart.
It would be desirable to make the same, without a telnet.
For example with the help ser2net. But there all is cut very down, there is no fitter, the archiver. ssh is not present.
nc, tftp, tar... Anything is not present. At all I do not know as to transfer there this ser2net-3.0-mc2.tar.gz
And how then to unpack? Whether it will be compiled generally?:weep:
It is necessary to connect the microcontroller to the camera.