1

Topic: How to win the big frame on the monitor at connection through HDMI with Canon 600D?

Colleagues, advise!
Bought on Aliexpress inexpensive  7 inch monitor Viltrox DC-70 II to the Canon 600D, monitor resolution 1024600 points.
https://ru.aliexpress.com/item/Viltrox- … Title=true
It appeared it is disappointed - a picture on the monitor small because of the big frame, and HD there at all does not smell. If to include function in monitor Pix menu to Pix it occupies all screen, but it only in a mode the bench . At pushing on Rec the monitor dies away for some seconds then the picture again becomes small in 480p.
In a network read that the monitor, and HDMI a camera output is guilty not. At connection to TV to plasma on HDMI all the same, as on  the monitor.
Here read about a hint that it can be cured adjustments Magic Lantern.
snimifilm.com/post/vybiraem-vneshnie-monitory-dlya-dslr-kamer
Rummaged in adjustments, and found in tab Display from ML a line "Force HDMI to VGA". As write to networks in a manual on ML, it for my case. Checked up, really, on the monitor video in low VGA resolution in 480 points starts to move. Thus there is no long black screen at pushing on Rec and on Stop. But resolution turns out very low - 480p, both in a write mode, and in mode Stand By. And the most important thing thus is not treated - a picture in write time both was small with the big border, and remained.
Whether it is possible to win a small picture with the big frame on output HDMI Canon 600D? Thanks!

2

Re: How to win the big frame on the monitor at connection through HDMI with Canon 600D?

gushin
Look on a site of the manufacturer of technics...  there are new insertions. In the same place on a site look FAQ and their forum (if it is finite it is there at them). Visiting of foreign technical sites on a device subject will be useful also. If, as you write,  and on TV shows not as the same is necessary all look new an insertion for the . Probably in new insertions the problem with HDMI a signal is eliminated.

3

Re: How to win the big frame on the monitor at connection through HDMI with Canon 600D?

I wrote to authors of some English-speaking videos on Youtube about problems HDMI of an output on Canon, now I look forward to hearing. To hide all technical information on a border, they disconnected any UI by means of insertion Magic Lantern.
Adding from 12/19/2016 17:03:
Just the answer from Evgenie Pavljuchenko from Russia came, it appears, this problem is not treated in any way. Such is an output on cameras Canon:
[video] https://www.youtube.com/watch?v=qAcmw2GVyzk [/video]

4

Re: How to win the big frame on the monitor at connection through HDMI with Canon 600D?

Try, if there will be a possibility as the device on  other manufacturers leads: , Sleepyheads for example (ask such  at the friends familiar).  this problem only for Canon?

5

Re: How to win the big frame on the monitor at connection through HDMI with Canon 600D?

He in video speaks and shows that it is a problem only at Canon. On Sony all is normal with HDMI an output.

6

Re: How to win the big frame on the monitor at connection through HDMI with Canon 600D?

> 2k16
> Not to use a pad as the screen on Wi-Fi

7

Re: How to win the big frame on the monitor at connection through HDMI with Canon 600D?

GYD :
> 2k16
> Not to use a pad as the screen on Wi-Fi

It you to whom? Also what here it is ciphered?