1

Topic: Gigabyte Z77-S3H. Cyclical reboot

Kind time of days
Sabzhevaja mother has been bought about 5 years ago and fulfilled appropriate period. Not without jambs, but I reconciled to them
Yesterday , ungeared a computer, well or sent in hibernation, I do not remember
Today I include. I turn around - the black screen. All right I think,  at loading, it happens to it with depressing . I overload. It is twisted  by Vyn10, it is long twisted, minutes 2. At me , loading goes quickly. I overload. Again the black screen. On the next time the screen with title  lights up, but except title and a background booted nothing. After that a pattern following. The computer starts, second the indicator power scrolls coolers then coolers are disconnected, dies away, the pause of second in two-three and all begins at first. Replaced , there was Chiftek on 500, the Corsair on 750 delivered. The Same pattern.
Disconnected hards and . The Same pattern. Pulled out  and a sound card. The same pattern. Pulled out storage. Without changes.
I understand that mother on 90 % irrevocably died, but here judging by Google such problem was not only at me, up to incomplete loading . And all bum that at me the Windows license is anchored to mother.
Who can nevertheless that prompts the valuable?
Thanks
Vitaly

2

Re: Gigabyte Z77-S3H. Cyclical reboot

Jack30
"The Windows license" will be anchored to any other floor-mat. To a board - if it not Windpws 10 - is activation by phone if 10 - at me it was activated on a key after changeover 3 floor-mat. Boards  with  and the RAM. "Mother on 90 % irrevocably died" - let is based with the world or to give/sell/replace to people with a soldering iron.

3

Re: Gigabyte Z77-S3H. Cyclical reboot

Last that it is necessary to make with mother - to take out a battery and to short-circuit contacts. There were cases when UEFI a BIOS at all it did not allow to be loaded to the machine. However, not with Z77. In particular, after the first . That in it rolls over and that - nobody knows. Such  in the service-center on my eyes recovered one mother about whom I thought that it absolutely died - untwisted fans, was ungeared and again turned on on a circle. It appeared that it is widespread enough case.
Adding from 10/8/2017 11:46:
After this operation this mother worked some years absolutely normally and with good loading. Only it is impossible in  to withdraw it - there will be the same. What chipset and a BIOS - I do not remember. This computer not at me.

4

Re: Gigabyte Z77-S3H. Cyclical reboot

Jack30
Very similar on a problem which I faced with 2-mja the same MT, only different audits. The problem consisted in a meeting of insertion BIOS which can be corrected only by means of the programmator with  chips. In this to a subject  result a little bit  service operations on the given problem, but in the description of a prehistory you, probably, find coincidence to the problem. Then also the decision - similar described.

5

Re: Gigabyte Z77-S3H. Cyclical reboot

6wings :
Last that it is necessary to make with mother - to take out a battery and to short-circuit contacts. There were cases when UEFI a BIOS at all it did not allow to be loaded to the machine. However, not with Z77. In particular, after the first . That in it rolls over and that - nobody knows. Such  in the service-center on my eyes recovered one mother about whom I thought that it absolutely died - untwisted fans, was ungeared and again turned on on a circle. It appeared that it is widespread enough case.

Thanks, I will try. Clear CMOS to make not the problem.

leto_zero2 :
Jack30
"The Windows license" will be anchored to any other floor-mat. To a board - if it not Windpws 10 - is activation by phone if 10 - at me it was activated on a key after changeover 3 floor-mat. Boards  with  and the RAM.

"It was activated on a key" in sense? There was box/oemnaja version Windows 10? At me Windows 10, and that the most sad received on update from Windows 8. And at it  a binding to the board MAC-address.

6

Re: Gigabyte Z77-S3H. Cyclical reboot

Jack30
[off] Windows 10 1703 Pro update with 8 - the last time after "iron" changeover entered a key 8 (it is peeped on official resources of Microsoft). Or 8 was "national"?
On versions 10 to the last activation by phone with input of a key 8 sufficed. [/off]

7

Re: Gigabyte Z77-S3H. Cyclical reboot

Jack30
Thanks, I will try. Clear CMOS to make not the problem.
Only try so - with  batteries and short circuit of its contacts on mother. Clear CMOS by means of a regular strip on the motherboard of effect did not give. It I tried houses.
And still - the battery after 5 years of operation should be replaced, of course. But you, probably, and without me know it.

8

Re: Gigabyte Z77-S3H. Cyclical reboot

GrayWolf , 6wings - thanks!
More shortly I tell as it transited. At me apparently was same  as at GrayWolf ' and.
After that reading that you wrote to me made the following
1. Nullified . Did not remove a battery, simply shorted a jumper
2. Used the first method from here . I do as it is described, I launch once again - anything, after the second or third automatic reboot the machine suddenly starts to be loaded and update  from . !
3. I come into a BIOS all works, I connect all disconnected, I load.... And the same  - very long loading, after one two reboots cycles again begin
4. But I that already clever, again chop off the machine, again I try to use a checked method, and suddenly, I    refuses to turn on generally!
5. I chop off all a cable, I wait long enough, again thrust a supply,  like started. Again a method No1, again recovery  I come in  and I start to swarm up all menu items... !!! Certainly SATA costs in IDE a mode. And after all it was twisted in a head that it is necessary to check up, and after all thought of it, the blessing that on one of working machines is a constant problem, but is not present. .
6. I switch in AHCI, loading, a native desktop. Works!
Similar yes, a battery under urgent changeover (though the calendar keeps)
At the same time in the course of assembly-dismantlings reached, why earphones do not work for me, from diligently connected front-panel.
Thanks for the help. GrayWolf if at you it a constant problem add a method to the arsenal.
Though considering that like offer for rather small money asus Z77-A, there is nevertheless a desire to replace mother. Only Windows it is a pity. Though... Can pretend to be "invalid"?

leto_zero2 :
Jack30
[off] Windows 10 1703 Pro update with 8 - the last time after "iron" changeover entered a key 8 (it is peeped on official resources of Microsoft). Or 8 was "national"?
On versions 10 to the last activation by phone with input of a key 8 sufficed. [/off]

I.e. setting Win 10, a failure from key input at setting and input of a key from Win8 after the setting termination?
I so put ten, but it was more year back while the period of free update operated
8 fairly bought for 500  under the action

9

Re: Gigabyte Z77-S3H. Cyclical reboot

Jack30
Thanks for the help. GrayWolf
Please! Was glad to help.
If at you it a constant problem add a method to the arsenal
Does not help. At me does not work renewal BIOS from a reserve chip (mode BIOS Recovery). Such impression that both fly. Only an insertion with .

10

Re: Gigabyte Z77-S3H. Cyclical reboot

Jack30
About a failure of input a key at setting I can not tell, since the system already was on a disk (plus a clone reserve on other disk).
The last time activated 10-ku keys 8 in the end of July of this year after changeover a floor-mat. Boards, , the RAM and warnings of system of 3 day period for key introduction....
Window with activation by phone removed, seemingly, in the last version 10.

11

Re: Gigabyte Z77-S3H. Cyclical reboot

Jack30
I so put ten, but it was more year back while the period free obnovlenija8 fairly bought for 500  under the action  operated
Such ten cannot be transferred on new iron (ask Igor Lejko:laugh:)

12

Re: Gigabyte Z77-S3H. Cyclical reboot

Kolyan512
[off] such ten cannot be transferred on new iron (ask Igor Lejko)
Safely transferred on 3 configurations. All three times activation flied - activated by phone twice, on version 1703.15063 this possibility ceased to exist, but used search on the Internet it is possible to find much, for example: http://dadaviz.ru/sletela-aktivatsiya-windows-10/ - except KMSAuto. The key from bought 8 on which by update it was put 10 "3 glands" back has been accepted. Igor Lejko as I understood now, was not against such turn as activation from Microsoft. Occasionally to try easier, than to make type statements: I did not do, but so it is impossible.... [/off]

13

Re: Gigabyte Z77-S3H. Cyclical reboot

leto_zero2
Occasionally to try easier, than to make type statements: I did not do, but so it is impossible...
- But it is better, simply to read the software license agreement which you accept...

14

Re: Gigabyte Z77-S3H. Cyclical reboot

15

Re: Gigabyte Z77-S3H. Cyclical reboot

leto_zero2
Porobujte to read the Agreement and to try to understand about what there speech
- You did not note? I also wrote it:laugh: - "but it is better, simply to read the software license agreement which you accept"
And how "bed-sheet" which you  here, contradict what I wrote?:lol:

16

Re: Gigabyte Z77-S3H. Cyclical reboot

Kolyan512
Such ten cannot be transferred on new iron (ask Igor Lejko)
Asked Microsoft - it is possible. And persons. The agreement not  to it in the text. Read - for the general development, it short.

17

Re: Gigabyte Z77-S3H. Cyclical reboot

leto_zero2
Read - for the general development, it short
Double 2...
- You did not note? I also wrote it - "but it is better, simply to read the software license agreement which you accept" wink
"Such ten cannot be transferred on new iron (ask Igor Lejko)" at what here it???
This message concerns the author of a subject, instead of to you...

18

Re: Gigabyte Z77-S3H. Cyclical reboot

Kolyan512 [off] it is good.
From what information there was an announcement such to ten it is impossible to transfer on new iron (ask Igor Lejko) And why to ask it, instead of at Microsoft?
I wrote to the author of a subject that activation transits on other iron - if noted.
I about it. [/off]

19

Re: Gigabyte Z77-S3H. Cyclical reboot

leto_zero2
From what information there was an announcement such to ten it is impossible to transfer on new iron (ask Igor Lejko)
Windows 10 (a part 4), #5895

20

Re: Gigabyte Z77-S3H. Cyclical reboot

[off] Above "bed-sheet" about it - "Chat", with reversal number in the end. [/off]
Adding from 10/12/2017 20:45:
[off] Now it is necessary to speak, that at leto_zero2 asked how to activate 10-ku on new iron a key 8 on which it was updated to it (10). [/off]
big_smile

21

Re: Gigabyte Z77-S3H. Cyclical reboot

What relation has your chat to the author of a subject?

22

Re: Gigabyte Z77-S3H. Cyclical reboot

[off] Problems at the author of a subject was two - a hardware jamb with . A board and in case of death . loss activated on a key 8 10. . The board managed to be recovered. The second question, about activation, interested him. I, from its part, imparted experience to activate 10-ku on other iron on a key 8.... In a chat confirmed what to activate 10-ku on a key 8  business. You would read all subject. I.Lejko could be mistaken, could not understand. It did not work (now it on pension) in Microsoft. It the expert on client systems in the area of MVP Microsof was many years. [/off]

23

Re: Gigabyte Z77-S3H. Cyclical reboot

Remarkably. From me that is necessary for you??? To the author of a subject also answer.

24

Re: Gigabyte Z77-S3H. Cyclical reboot

Kolyan512
Draining is included.

25

Re: Gigabyte Z77-S3H. Cyclical reboot

leto_zero2
Draining is included.
What else merging?? That??
I specially made specification - "but it is better, simply to read the software license agreement which you accept"
In the agreement all is painted and reading it, there is no need  with workers Microsoft:eek:...