1

Topic: Problem from Asus X99-A II! Help that to make.

Kind time of days.
And so... Problems with USB it appears  ... I did not think at all that there can be even more abrupt problems. And so I describe:
On a board 10 SATA ports from which I wanted to involve exactly 8... I conceived to deliver two systems on identical SSD on 240  everyone... I conceived to drag HDD from ports 1/2 on 3/4, cutting torches to drag on the ports 5/6, a separate sled for the removable screw to drag on port 8, and one more SSD for all fast to deliver on port 7.
I think here all clearly? If yes, I describe with what I .
at me not good not the bad FSP Group HEXA 85 Plus 600W, as consequence of connectors under  is a lot of, connectors under mum is dual 4+4, and here one more 4 is not present... It is not long thinking and reading a manual that where moves in this additional connector which on 4 , I considered that it is possible to find something from Pentium4, to bite off and on strands with two  ... Counted and made. All worked, but sometimes that for some reason hung at a stage of loading of OS, at a stage of an output from . I all sinned on that that OS old and so on... I even cables changed all which could... But here dared to put SSD and to do rotation. As at me was two SSD on 120, I decided to send on errands them for the speed to understand on  to me . On  did not want, therefore opened new Patriot but as soon as I connected it to a sled which are connected to the same  on which this strand - SSD literally  hung here... I allow to interpose another already cautiously. . The second not ... I allow there to try to interpose HDD, HDD not , but it did not begin to be defined. As a result I was hardly rolled away on 3770... A question,  could such happen from what burned out SSD and there was a stench?

2

Re: Problem from Asus X99-A II! Help that to make.

Contacts in a connector looked?

3

Re: Problem from Asus X99-A II! Help that to make.

Kolyan512
In a connector on  either on a sled or on SSD or on a loop?

4

Re: Problem from Asus X99-A II! Help that to make.

[off] CrashOverride
Not good not the bad FSP Group HEXA 85 Plus 600W
To bite off and on strands with two  ... Counted and made.
At you it is a lot of devices and iron expensive, what for you sat on ordinary  and risked homemade products, i.e. at you already was at least three reasons it to replace. [/off]

5

Re: Problem from Asus X99-A II! Help that to make.

Yakety_Sax
Well because of that that it is possible to create hands I did not consider it necessary to change ... Especially  will be involved only for here this tail and for Mobile Rack Sven... But also SVEN too apparently has been put out of action. I sit now on i7-3770K here on that old man which more shortly and scalping already withstood... But here that is interesting, it works thus that more slowly in peak, in games for some reason more smoothly.
And what three reasons to change  I were and did not understand) from the reasons for me there was this one), all remaining completely arranges)

6

Re: Problem from Asus X99-A II! Help that to make.

CrashOverride :
....Connectors under mum is dual 4+4, and here one more 4 is not present... It is not long thinking and reading a manual that where moves in this additional connector which on 4 , I considered that it is possible to find something from Pentium4, to bite off and on strands with two  ... Counted and made.

Once again, Kresh, and on . Where also what? From 12 did a connector on a supply ?
Or on  4+8, and on  4+4? And you decided to make missing 4 ? Also took a current from the wires going on the drive? And, to a heap, made without soldering, that is simply strand:insane:??? I correctly understood?
But where on Asus X99-A 4+8? https://3dnews.ru/assets/external/illus … scheme.png [off] (1343x1600, 137.4Kb) [/off]
Yours . Connectors:

Type of a connector for the motherboard 20+4 pin
Number of connectors 4-pin IDE 4
Number of connectors 4+4 pin CPU 1
Number of connectors 15-pin SATA 4
Number of connectors 4-pin Floppy 1
Number of connectors 6+2-pin PCI-E 2

So what

and here one more 4 is not present...

was specific is not present???
It is possible photos of what you ??

7

Re: Problem from Asus X99-A II! Help that to make.

Forzay
Once again, Kresh, and on . Where also what? From 12 did a connector on a supply ? Or on  4+8, and on  4+4? And you decided to make missing 4 ? Also took a current from the wires going on the drive? And, to a heap, made without soldering, that is simply strand??? I correctly understood?
Correctly)
On Asus X99-A is not present, and here on AII - is.
Adding from 9/6/2017 21:10:
Here

8

Re: Problem from Asus X99-A II! Help that to make.

Well and would fasten a homemade product to already existing 4+4. There a store on a current at wires, a minimum, double. And only soldering . Any strands,  etc.
Made collectors still in 2000 had a rule - on a line of a supply of hards not to hang up , valves.

9

Re: Problem from Asus X99-A II! Help that to make.

Forzay
... You see I:
1) did not know about it
2) hards and DVD cutting torches and as one SSD were also that  on that line on which the CPU.
3) according to the description, this line as though  and as though it is possible without it at all if not to drive...
Well I thought that will undertake from it all the same nothing and consequently made than a smog... And it would not be desirable to solder somehow if all early not to drive)

10

Re: Problem from Asus X99-A II! Help that to make.

CrashOverride :
Forzay
... You see I:
1) did not know about it
2) hards and DVD cutting torches and as one SSD were also that  on that line on which the CPU.
3) according to the description, this line as though  and as though it is possible without it at all if not to drive...
Well I thought that will undertake from it all the same nothing and consequently made than a smog... And it would not be desirable to solder somehow if all early not to drive)

If not to drive, and  it. Release a line of a supply of drives from any unusual loading. And from strands especially.

Well I thought that will undertake from it all the same nothing

There is there no equalization of loading on lines. Only  and the general bus. We tell so, the current is spread uniformly through all connections.

11

Re: Problem from Asus X99-A II! Help that to make.

Esteemed here I think... The reason  it is casual not in this ?

12

Re: Problem from Asus X99-A II! Help that to make.

CrashOverride :
Esteemed here I think... The reason  it is casual not in this ?

You  turned off all, and all the same hangs?
, you somehow  about . About the, or in a subject under the link? If about the, - yes, ..

Release a line of a supply of drives from any unusual loading. And from strands especially.

I am to a clod wrote?

13

Re: Problem from Asus X99-A II! Help that to make.

Forzay
I just about the  from strands and an additional supply. Generally, for what began to put also this 4-yoh  the plug?

14

Re: Problem from Asus X99-A II! Help that to make.

CrashOverride :
Forzay
I just about the  from strands and an additional supply. Generally, for what began to put also this 4-yoh  the plug?

The guaranteed store on a current through .

15

Re: Problem from Asus X99-A II! Help that to make.

Forzay
And I thought that the reason in that that on  the transformer 36 voltaic and that the total 3x12 is necessary.

16

Re: Problem from Asus X99-A II! Help that to make.

CrashOverride :
Forzay
And I thought that...

erase the post, and that peck.

17

Re: Problem from Asus X99-A II! Help that to make.

Kolyan512
... And what happens to hard disks, their controlers, controlers of the motherboard and other if the line +12 goes on  the powerful videocard or the CPU? Why sections start to be strewed to some ? Here for example too most it is told, and at me it began to happen only recently. SSD such has been killed instantly, with a smell of burning at the moment of PC start... Another SSD did not die, HDD too did not die. And here a sled for some reason came to such worthlessness what even on other PC any more do not work.

18

Re: Problem from Asus X99-A II! Help that to make.

ssd eat from 5, hdd big from 12, and further already a lottery... Shoots or not...
You are possible  12 on five-voltaic contacts (or ... I and did not understand  at you there happened:laugh:)
(By the way, the small sign - a title influences wink... flare, Sparkman and .....)

19

Re: Problem from Asus X99-A II! Help that to make.

Kolyan512
In that and business that is not present. 5 voltaic contacts are not involved, though  were. In general something is a bit strange... If as it is written in that subject that receptacle from 4-yoh  really is not necessary... And it is similar as for 6950 too it to  is not necessary because 6950 quite easy can work on X99-A on which there is no this receptacle) only  mum it is necessary)

20

Re: Problem from Asus X99-A II! Help that to make.

Smell of burning, it, it is simple so does not appear... Somewhere you ...
And on a sled at you the fuse in a type smd the resistor can be unsoldered, it to replace it can is possible ... it can the second  could and rescue... a smog :laugh:...

21

Re: Problem from Asus X99-A II! Help that to make.

Kolyan512
You tell is better, what for with TDP 140 supply 24+8+4) After all to stones with TDP 130 and in general even to newcomers HSW-E with TDP 140 sufficed processors a supply 24+8... What is  in BDW-E that  24+8+4 became necessary to it moreover and with the second  boards?)

22

Re: Problem from Asus X99-A II! Help that to make.

Kolyan512 :
ssd eat from 5, hdd big from 12, and further already a lottery... Shoots or not...
You are possible  12 on five-voltaic contacts

SSD disks work a little differently. They happen two types - to the main supply on 12 volts and with the main supply on 5. For example SSD disks of firm of Intel contain inside the controler which 12 volt transforms in 5. SSD from OCZ do not use the bus of 12 volt. At them the main loading is necessary on the bus of 5 volt.

23

Re: Problem from Asus X99-A II! Help that to make.

Forzay
Here a question in other) look.
Sandy Bridge-E had TDP 130W and connector ATX 24+8 demanded
Ivy Bridge-E it is nominal TDP same 130W, but he eats less approximately under the same formula as a difference between Sandy Bridge and Ivy Bridge 95: 77=1,2337, thus transfer about 32 nanometers on 22 nanometers gave saving of 23,37 % and real TDP became 105W
Now  we consider Haswell-E and Broadwell-E) it is primary Hasweell-E had TDP 140W at technical process of 22 nanometers... It replaced Broadwell-E which it appeared on 14 nanometers process... This Broadwell-E most likely  the owl in ~1,2337 times is less... And that 140W: 1,2337 = 113W...  is under Broadwell-E and under Haswell-E both old and new and both after alteration support Broadwell-E. If it so, what for  consuming 113W  2 12 pin a grub? The same Pentium 4 when was under the same 130W and even 150W by the way Sandy  had TDP 150W... And so for what more economical CPU has more than meal channels?

24

Re: Problem from Asus X99-A II! Help that to make.

More shortly, I saw to.  burned slightly " and folders" 12V. Here it is visible for  and   .
And once again -  it is not equal to consumption. Proceeding from specifications  that  that  -  always will be below peak consumption. And if about acceleration where it is possible 2 consumption? Then that?
Be not loaded by the theory - do . - appears so it is necessary. Accumulated a pocket does not pull.
Adding from 9/8/2017 04:03:

CrashOverride :
Ivy Bridge-E it is nominal TDP same 130W, but he eats less approximately under the same formula as a difference between Sandy Bridge and Ivy Bridge 95: 77=1,2337, thus transfer about 32 nanometers on 22 nanometers gave saving of 23,37 % and real TDP became 105W
Now  we consider Haswell-E and Broadwell-E) it is primary Hasweell-E had TDP 140W at technical process of 22 nanometers... It replaced Broadwell-E which it appeared on 14 nanometers process... This Broadwell-E most likely  the owl in ~1,2337 times is less... And that 140W: 1,2337 = 113W...?

What horse-radish you consider? It from a series of 36 volt on . What real ?  - the requirement to cooling system. And it always real - declared (!!!) the vendor . To technical process has no the slightest relation!!! , fasten.
What for one more 4-pin? Yes, a pancake,  for    in a ruler. 100 points, there  it is fastened on a microcode  and absence . locks acceleration. What there a top in a ruler? 6950? Here for it and , most likely. And could and simply acceleration  for all  at . I  that in a head at  .
Check up itself - remove all the  , leave 8-pin and look - blocks to you acceleration or not... At you 6800?
And, by the way yes, you  (with group stabilizing) is simply counter-indicative to yours  and  in the presence of powerful . At shortage of a current on 12 shakes a trance and tightens not only 12, but throws and 5. All.

25

Re: Problem from Asus X99-A II! Help that to make.

Forzay
Check up itself - remove all the  , leave 8-pin and look - blocks to you acceleration or not... At you 6800?
Acceleration does not disappear from possibilities.
And, by the way yes, you  (with group stabilizing) is simply counter-indicative to yours  and  in the presence of powerful . At shortage of a current on 12 shakes a trance and tightens not only 12, but throws and 5. All.
It as? Like it it is necessary to send on errands so that mum do not grieve. I such  as 1,4V on a kernel do not play about.