1

Topic: Whether probably to adjust ZTE MF823D only WEB the interface?

Kind time of the days, respected.
Is available ZTE MF823D. 3G/LTE USB "whistle". It is not stitched for any specific operator.
I want to use it as the channel in the Internet from the home computer, the video logger, etc.
Bought, thrust a sim card, thrust a gadget in USB port on a stationary computer, and it is not visible to a network in  a computer.
Sim card "live" from tele2, from a pad. In the Pad the Internet with it is. On a computer Windows 8.1.
On Internet open spaces found the instruction that it is necessary to enter in WEB the interface on IP http://192.168.0.1/ and all there to adjust.
But connections it is impossible. At  in USB this gadget at first shines red, then long blinks dark blue, and through long enough period starts to blink the green. The host 192.168.0.1 is not accessible and not .
Tried 192.168 first tens addresses. .1 the same result.
To reach in the Internet by means of this gadget it is impossible.
What do I do not so?

2

Re: Whether probably to adjust ZTE MF823D only WEB the interface?

qu-qu
The modem flash card as cdrom is connected? Make to "derive", there should be a network adapter.
The green blinks - means to a network of the operator it is connected.

3

Re: Whether probably to adjust ZTE MF823D only WEB the interface?

seack :
qu-qu
The modem flash card as cdrom is connected? Make to "derive", there should be a network adapter.
The green blinks - means to a network of the operator it is connected.

There there is no flash card. Probably it is cut-down version. Is only  in the case where it could be.

4

Re: Whether probably to adjust ZTE MF823D only WEB the interface?

qu-qu
There there is no flash card. Probably it is cut-down version. Is only  in the case where it could be.
Under a flash card meant the internal drive smile
After modem connection cdrom with "drivers" appears?

5

Re: Whether probably to adjust ZTE MF823D only WEB the interface?

qu-qu
To be convinced of mismatch ip at a router and HiLink the modem.
It is possible to begin with in the documentation by default.

6

Re: Whether probably to adjust ZTE MF823D only WEB the interface?

seack
After modem connection cdrom with "drivers" appears
Yes, now paid attention, appears.
What with it to do? There any self-fitter of program ZTEMODEM.
Autosetting/autostart at me  Windows policy.
Whether usage of a whistle without setting of this program is possible?
After all if I deliver a whistle in the video logger there such program not to install.

7

Re: Whether probably to adjust ZTE MF823D only WEB the interface?

qu-qu
Yes, now paid attention, appears. What with it to do? There any self-fitter of program ZTEMODEM.
H to "derive", there should be a network adapter in system and earn an Internet through the modem
For devices which so cannot, it is necessary to change modem adjustments, since a named composition ( the link ).

8

Re: Whether probably to adjust ZTE MF823D only WEB the interface?

seack
It is necessary to change modem adjustments, since a named composition (link).
"Composition" I there did not find a word.
It not that command?

Not to enter this command each time after modem shut-down, switch the modem in "a call-back" mode http://192.168.0.1/goform/goform_set_cm … =auto_dial

9

Re: Whether probably to adjust ZTE MF823D only WEB the interface?

qu-qu
So at you the modem in the computer earned?
"Composition" I there did not find the Word.
It not that command?

At them it is called mode.

10

Re: Whether probably to adjust ZTE MF823D only WEB the interface?

seack
So at you the modem in the computer earned?
:beer: Thanks, earned.:super:
But it is necessary to me that it worked in the video logger, and there a command "to derive USB a disk" I cannot send.
What MODE: 1405 or 1403 should be, that the modem worked at once without commands of the user?

11

Re: Whether probably to adjust ZTE MF823D only WEB the interface?

qu-qu
What MODE: 1405 or 1403 should be, that the modem worked at once without commands of the user?
I do not know precisely about the video logger, under my link commands for switching in RNDIS (1403) and Default (1225) are resulted. Pay attention, there two commands it is necessary to send through putty on the modem after switching in factory mode - switching to the necessary mode (1403 or 1225) and an output from download mode.

12

Re: Whether probably to adjust ZTE MF823D only WEB the interface?

seack
Under my link commands for switching in RNDIS (1403) and Default (1225) are resulted. Pay attention, there two commands it is necessary to send through putty on the modem after switching in factory mode - switching to the necessary mode (1403 or 1225) and an output from download mode.
You could not "chew" to me it?:lamer: "In antecedents" in the beginning 90 I still could adjust the telephone modem, through AT commands (At me till now Jus-Robotiks "the Russian messenger" somewhere rolls). But now I already forgot all. Those modems sat on Clods-ports, and this on .
Yandex suggests to download putty for Vindovs 8.1. Whether there are built in tools in Windows to adjust my Jusb-whistle, i.e. to make that you wrote above. Whether command line more less I own.

13

Re: Whether probably to adjust ZTE MF823D only WEB the interface?

qu-qu
Putty take here .
At connection on com to port, port number look in the Manager. Ports appear after switching in factory mode (the modem  can it is necessary will), there will be some ports (do not remember 2 or more), try by turns.
After switching in factory mode the modem as the modem will not work !
It will be necessary is mandatory to be connected and give on it a command.