1

Topic: Problem with playback 4k video.

On the occasion of purchase 4k the TV set for review of appropriate videos collected  on the basis of Pentium G4620 (Vstrojka HD630, hardware support h265 HEVC 10bit is declared), 8gb the RAM, Windows 10, all software and drivers of the freshest version. A problem in the following: at setting of resolution FullHD, or at connection to the normal monitor all works remarkably, Pot Player and analogs twist 4K h265 HDR video with hardware acceleration, loading of the processor within 10 %, all is excellent. At setting of "fighting" resolution 3840*2160 loading of the processor at playback jumps up to 50 % and logs as though hardware acceleration is disconnected begin. Such pattern is watched and in KMP, MPC HC, MPC BE, VLC players. It would Seem that the processor is rather weak, and to do nothing, but Windows standard application "Cinema and TV" to this bug is not subject, and twists the same videos both in FullHD, and in 4K without halts with minimum loading of the processor.  I would accept also it, but there there is no support DTS. On this a question, who is possible that faced a similar problem, or can advise where to dig? To look 4K video with  to FHD on 4K a TV set explicitly not a variant sad

2

Re: Problem with playback 4k video.

thyrane
On the occasion of purchase 4k the TV set for review of appropriate videos collected  on the basis of Pentium G4620
At  on 1151 chipsets 100-200 it is possible to tell that is not present HDMI 2.0 which would transfer 3840*2160 on frequency of 60 frames.
It should do a signal on 4k the display awfully discomfortable.
I do not understand that to you to solve, while you do not buy in addition hdmi 2.0, for example, GT 1030.

3

Re: Problem with playback 4k video.

[off]

Yakety_Sax :
It should do a signal on 4k the display awfully discomfortable.

And now translate it into Russian. [/off]

4

Re: Problem with playback 4k video.

Yakety_Sax
It should do a signal on 4k the display awfully discomfortable.
For review of films with frequency 24 frames/with HDMI 1.4 suffices for eyes, especially the TV set too does not support 2.0.

5

Re: Problem with playback 4k video.

thyrane :
Yakety_Sax
It should do a signal on 4k the display awfully discomfortable.
For review of films with frequency 24 frames/with HDMI 1.4 suffices for eyes, especially the TV set too does not support 2.0.

I, of course, do not know subtleties of playback of a film with frequency 24 frames/with at frequency of the screen of 30 frames/with, but it, probably, not so well. I would listen to advisers and tried to thrust the exterior videocard. Also check up, can at you at playback any video filter like ffdshow which loads system is launched?

6

Re: Problem with playback 4k video.

Use a sheaf the monitor + TV, or only on TV work, i.e. TV as the unique and main monitor? Not . Clearly with setting of "fighting" resolution. If TV as the monitor, it there the only thing.

7

Re: Problem with playback 4k video.

Mazzza
I, of course, do not know subtleties of playback of a film with frequency 24 frames/with at frequency of the screen of 30 frames/with
From what it suddenly frequency of the screen of 30 frames? 24 will be if correctly to adjust
Yes, the mouse jerky will move, but the cinema - as should

8

Re: Problem with playback 4k video.

Mazzza
I installed frequency of scanning 24hz, at 30 it really looks not so well, exactly as well as at 60). About filters like all on a default, superfluous did not include, only DXVA and  codecs everywhere where it is possible. From videocards I can while only gtx670 to thrust, whether I do not know truth there is a sense, it does not support decoding h265 is hardware.

9

Re: Problem with playback 4k video.

thyrane
Whether I do not know truth there is a sense
Is not present hdmi 2.0 = there is no sense.

10

Re: Problem with playback 4k video.

Yakety_Sax
Do not write here more if there is nothing to tell, really. To play 120 hertz I on the TV set I do not gather.

11

Re: Problem with playback 4k video.

Rather than in this TV set there is no built in player which could show video from a computer?

12

Re: Problem with playback 4k video.

serg_gon :
Rather than in this TV set there is no built in player which could show video from a computer?

Is DLNA, but for review of films it not strongly approaches, since truncates resolution of broadcast video, and not all formats digests. Could play back the TV set films from storage directly on FTP, or other similar method, the prices to it would not be, but such possibility did not find.

13

Re: Problem with playback 4k video.

thyrane
SidAlexx
Use a sheaf the monitor + TV, or only on TV work, i.e. TV as the unique and main monitor?
Respected SidAlexx asked an important question which you did not answer:weep:

14

Re: Problem with playback 4k video.

Kant :
thyrane
SidAlexx
Use a sheaf the monitor + TV, or only on TV work, i.e. TV as the unique and main monitor?
Respected SidAlexx asked an important question which you did not answer:weep:

Really, passed:shuffle:. Yes, TV is used as the unique monitor. By default it exposes resolution 3840*2160 in which problems are watched, at manual change of resolution to 1920*1080 problem disappears. There was a thought that what that is guilty in the image scaling of the interface which at a choice of native resolution turnes on on 300 % by default, however its switch-off did not help (

15

Re: Problem with playback 4k video.

1. To install  resolution and  24\25\30.
2. To look in a used player of adjustment of the decoder, about activation of hardware decoding.