1

Topic: House virtualization - advise a software?

There is to some extent perverted desire on  (Pegatron A15 i3 2130 (? Like such) 8gb RAM 2 HDD 240 + 500) to twist any , that  dense enough AXES on . Type  of different floods, NT4 - 2K, Win9x, Win 3x, OS\2 also can that else, but this core that hunting  smile.   a question.? With  it is a little not clear, how much it understands KVM. Tried to set up (and set up on ) ProxmoxVE - but on its adjustments it is visible that this is more under  application is calculated, a minimum made AXIS there 23. Still - it would be desirable, that in  it was possible to fasten a flopovod \CD \sound \setevuhu and to let out in a network through the bridge (in terms VirtualBox?) . From an Internet  such muzzle to KVM-QEMU - AQEMU. By sight on adjustments like as all is, an ambush only with a network (there it through NAT lets out). In general, advise, who understands? (Or teach how to adjust a network on a host so that  through the bridge walked. It is good, if can be loaded on a network, NetBut in a minimum type already works for me smile).

2

Re: House virtualization - advise a software?

d76
If the graphic interface for KVM, that is virt-manager is necessary
https://virt-manager.org /
With  it is a little not clear, how much it understands KVM.
VirtualBox in itself.

3

Re: House virtualization - advise a software?

Spetros
For days off I hope . I like the such would put Something in pair to aqemu.
somebody gives advice on an access subject  to  networks and on a 3D-acceleration subject?

4

Re: House virtualization - advise a software?

For debian.

 auto vmbr0
iface vmbr0 inet static
address 192.168.200.1
netmask 255.255.255.0
bridge_ports eth0
bridge_stp off
bridge_fd 0

https://pve.proxmox.com/wiki/Network_Configuration

5

Re: House virtualization - advise a software?

September
H'm... Proxmox and Aqemu a bit different things, it here generally is applicable.? Explain, who well understands,  smile.

6

Re: House virtualization - advise a software?

d76
It not for Proxmox, it for debian, is above written.
Generally that is necessary for you, a software for visualization, a muzzle for this software, or network adjustment?

7

Re: House virtualization - advise a software?

September

It is necessary here approximately as you told in the same sequence smile.
Explain, and a bridge to set that on DHCP - there are methods? It is all while stuck on , for experiences. And still - vmbr it is simple a title or it any special?

8

Re: House virtualization - advise a software?

d76
A bridge to set that on DHCP
It as "cucumbers a spoon of bank of mayonnaise".
Separately normal words, together bosh any.

9

Re: House virtualization - advise a software?

I reformulate. Whether it is possible bridge and bond types of interfaces to adjust on obtaining IP on DHCP?

10

Re: House virtualization - advise a software?

d76
I only on a statics did. But on idea it is possible, why would be not present.

11

Re: House virtualization - advise a software?

September
Well here when I on OpenMediaVault tried to make address obtaining (it is adjusted bonding on 2 ) on DHCP - it does not receive the address.

12

Re: House virtualization - advise a software?

d76
That in  it was possible to fasten a flopovod \CD \sound \setevuhu and to let out in a network through the bridge
And why not VMware WS which all it is able from a box?
With QEMU, from personal experience,  strangenesses with the mouse and a drawing above VGA c Win 3.x. The driver were put from CLGD 5446. The driver were loaded but a picture striped (a band of the normal image ~100 px further garbage etc.). Of a problem essence did not begin to get to the bottom. With QEMU there was simply an experiment. By the way, Win 3.11 800x600x4 (SVGA, 16 color) in QEMU it was launched normally.

13

Re: House virtualization - advise a software?

AVY
US $249,99 on
22 492.00 rbl. softkey
somehow very much  for house virtualization, not? With  to potter desires hardly less than 0. And to study qemu-kvm I consider more useful to personal erudition:D.
Here about  mice in  yes, are fears...

14

Re: House virtualization - advise a software?

d76
Chyoto somehow very much  for house virtualization, not? All depends on that how much you are ready to be enclosed in your hobby. The price list on old systems for experiments too not the modest smile
To study qemu-kvm I consider more useful to personal erudition quite reasonably. Itself I use QEMU in mode XYZ (Sparc, MIPS...) on IA. Tolerantly, if the drawing is not so necessary. Under such usage, actually, not especially and it is a lot of variants. Though Sun TCX framebuffer (1024x768x8) quite adequately works. It is checked up on Red Hat 6.2 Sparc smile. And here 102476824 any more does not cost

15

Re: House virtualization - advise a software?

AVY
(In a whisper) at me dense  on 3 2130 +8 frames  smile.
...Only time does not suffice to it ...

16

Re: House virtualization - advise a software?

d76
Dense  on 3 2130 +8 frames it is quite worthy under this task. It is possible also ancient. Itself sometimes I lift old systems on Celeron M 353 / 900@366MHz. More low frequency does not fall any more. Hangs. Rather authentic  smile
PS: RH 6.2 for Sparc if that, is the visitor in QEMU. Nostalgia, however. And a host normal IA under Windows or Linux. By the way, to honor Linux, 24 bit color only there rose.

17

Re: House virtualization - advise a software?

AVY
RH 6.2 for Sparc
Well here and to a hedgehog it is clear that QEMU. Though, would not be surprised, if at you  the present device smile.

18

Re: House virtualization - advise a software?

And again hello! smile
Here on days off tinkered on the above-stated subject, but on the main hospital. Wanted to attach in   with    (970GTX  to pouring). Esteemed there everyone,  packets,  configs it is rough and more many that, all any more I do not remember. As a result, from a host configs disconnect 3 devices: , the sound codec on it and exterior SATA- where it is connected  the separate screw  . A question the first. For some reason, when all is launched it in an automode (firmware-BIOS) if not to cause from the but-menu loading from the controler (it there at number 1, except it still  and ) it is written invalid boot device and the black screen. (Subtracted later that the people without a word generally it is simple  disk partition, on manners/dev/sda6, . But somehow strange, and at  all the same the manner  here would be desirable itself the auxiliary sections). On a subject  - after included it in a config , in  the device appeared also the driver was delivered (put only the driver, everyones Experience to me there did not fall anywhere). But here  not , a type error "the device cannot find enough resources for start". After jumps on a subject of untwisting from a config standard  QXL and display SPICE at start attempts does not work generally  since there is a suspicion that the machine not  that does not start start from controler SATA, and I  do not see the menu of loading and I can not push the necessary pedal smile. Everyones  and other adjustments tried to do with the help virsh edit and still virt-edit (so, apparently, it all is called). (After application of adjustments on a subject hyperv the mouse in  it is direct as  the business  became smile). As the main controlling interface  used virt-manager.   it is connected by a DVI-cable to the monitor.  prompt where to dig, where to dig? (Dualbut bothered). (Ask specifying questions.)