1

Topic: Whether there are holders of phones on glass without a sucker?

Actually, a question in a subject. Now there is a holder of the smart phone standard with a sucker, but it regularly comes unstuck also the holder with phone falls (the holder far not the first, at all this problem is, not at once, so after couple of months). With approach of colds of a problem with a sucker are strongly aggravated, while the machine and glass did not get warm, a sucker generally a horse-radish will stick, and then solid chance that in 5 minutes from cold glass all falls. I know, there are holders who are stuck in a grid of the air deflector, but on  deflectors are closed by hands of the driver, so not a variant. Here in an ideal it would be desirable the holder at whom the platform is stationarily molded on glass on a double-sided adhesive tape, and all remaining holder if needed is interposed into it. This circuit is in large quantities used in fixture of video loggers, but here for some reason with holders of phones such never saw. Who can in course, it generally happens in the nature?

2

Re: Whether there are holders of phones on glass without a sucker?

There are "holders" not with a simple sucker, and with a type sucker "liquid rubber". Holds much better, . The second variant, it to fix phone on a magnet. But on phone it is necessary to paste a thin metal plate (an answer part), or as a variant, the same thin plate hides UNDER phone cover. From minuses, in my opinion, under a cover and sim cards and the flash card, suddenly short-circuits that?:rolleyes:
Looks approximately so (is same with fixing on a torpedo) -
[url=http://i066.radikal.ru/1710/4f/9c1ffcfe4374.png] http://i066.radikal.ru/1710/4f/9c1ffcfe4374.png [off] (715x507, 255.2Kb) [/off] [/url]

3

Re: Whether there are holders of phones on glass without a sucker?

bc---
A double-sided adhesive tape
And .
What hinders to buy  an adhesive tape and to stick on it a sucker? wink

4

Re: Whether there are holders of phones on glass without a sucker?

bc---
Here in an ideal it would be desirable the holder at whom the platform is stationarily molded on glass on a double-sided adhesive tape, and all remaining holder if needed is interposed into it. This circuit is in large quantities used in fixture of video loggers, but here for some reason with holders of phones such never saw. Who can in course, it generally happens in the nature?
It is some decisions, all are checked up in severe conditions
1. A sucker to wash and wet before an attachment. Flew down too to wash and wet. If the sucker serviceable - 99 % that anything with it after that is not. Especially - if this sucker from crude rubber about which  Mitritch wrote above
2. To adjust fixing gopro for the holder of phone. Most simple - to cut off from the holder of phone a sucker and remaining unnecessary, instead - a plane platform on a double-sided adhesive tape gopro, then an adapter hinge that it was convenient to adjust a corner, and on glass a plane platform gopro a double-sided adhesive tape
3. To take the factory decision gopro
Such holder of phone - https://gopro.ru/collection/mounts/prod … hone-mount
And to it a plane platform of a double-sided adhesive tape gopro
Any of the enumerated decisions gives reliable fixing of phone. Decisions on basis gopro give inherent reliability.
Actually, the source of problems is clear - normal decisions for the strong jolting do not approach, and it, probably, is present
Adding from 10/3/2017 22:01:
I use here such turning fixing (a hinge adapter). Really quite good piece - https://gopro.ru/product/SP-SWIVEL-ARM-MOUNT

5

Re: Whether there are holders of phones on glass without a sucker?

Mitritch
The Second variant, it to fix phone on a magnet.
These variants too are interposed into the deflector, as far as I know.
Dmitriy Balashov
What hinders to buy  an adhesive tape and to stick on it a sucker?
I do not want to have the stationary fixed holder. Nevertheless it in 90 % of time is not necessary to me.
Goldenpen
A sucker to wash and wet before an attachment.
, I here came to garage... And here to wash-wet. And too not an ideal variant. Tried to breathe on a sucker, yes, sticks better, but can slide, and on a frost all the same minutes through 5 easily falls off from cold glass.
Especially - if this sucker from crude rubber about which  Mitritch wrote above
Here it it will be necessary to try. Only a question how to distinguish such sucker from others?
About gopro thanks for idea, are necessary  the information in this direction.

6

Re: Whether there are holders of phones on glass without a sucker?

bc---
About gopro thanks for idea, are necessary  the information in this direction.
Check, here it is possible to dig nothing - simply to buy, paste and use))
Ugu, here came I to garage... And here to wash-wet. And too not an ideal variant. Tried to breathe on a sucker, yes, sticks better, but can slide, and on a frost all the same minutes through 5 easily falls off from cold glass.
Can breathe not to help. First of all - to wash and it (with soap) both glass (at least simply) and damp to attach.
But if it is necessary to attach-unfix each time, of course, it not a variant. On a sucker frost not so keep, the fact - I thought at first that you should attach its time and that any more . If each time - crude rubber in the help, but, of course, more reliable variant - from  cameras fixture.
Only a question how to distinguish such sucker from others?
Here to you alive it to show - at once would understand. How to describe... It sticky the copyist. Rubber not solid-transparent, but black and very soft.

7

Re: Whether there are holders of phones on glass without a sucker?

Goldenpen
I thought at first that you should attach its time and that any more .
Yes is not present, I stupidly on silicone glue-hermetic would plant it, and all. Simply the holder is necessary not too often, therefore to have it in stationary fixed execution very would not be desirable.
Here to you alive it to show - at once would understand. How to describe... It sticky the copyist. Rubber not solid-transparent, but black and very soft.
Well the description quite intelligible. smile

8

Re: Whether there are holders of phones on glass without a sucker?

bc---
These variants too are interposed into the deflector, as far as I know
------------------------------------------------------------------------------------------------------------
Not only in the deflector, there is a model of the holder on "wet rubber", on a torpedo fastens, and above not a clamp, and a round or square magnet. At me on such model the Pad 8 "hangs - a foot will not tear off:gigi:
[url=http://s011.radikal.ru/i318/1710/e3/4561bbbbfe89.jpg] http://s011.radikal.ru/i318/1710/e3/4561bbbbfe89.jpg [off] (960x720, 265.9Kb) [/off] [/url]
Adding from 10/3/2017 22:52:
bc---
Here it it will be necessary to try. Only a question how to distinguish such sucker from others?
---------------------------------------------------------------------------------------------------------------------------
It is easy to distinguish. The normal sucker is a translucent polyethylene round hogwash, and "crude rubber"  colors "a round hogwash" THICK and sticky

9

Re: Whether there are holders of phones on glass without a sucker?

There are the holders interposed into a slot of CD-player.
http://qpmarket.ru/goods/Derzhatel-dlya … show_tab_2

10

Re: Whether there are holders of phones on glass without a sucker?

If there is no such holder - it is possible simply  a plane piece of plastic of the necessary size, to paste it on available the holder instead of a sucker and to plant on glass on 3 a double-sided adhesive tape.
Or as the variant - is  on a cooling grid, but they not on all machines normally rise.

11

Re: Whether there are holders of phones on glass without a sucker?

Here such hogwash
[img=518x515, 33.9Kb] http://forum.ixbt.com/post.cgi?id=attach:70:10640:10:1 [/img]
To hook for the deflector (happen in ) and to bend where and as it is necessary

12

Re: Whether there are holders of phones on glass without a sucker?

translator
There are the holders interposed into a slot of CD-player.
-------------------------------------------------------------------------------------
Very inconveniently such layout of the Navigator, it is necessary to LOWER a head to look.
--------------------------------------------------------------------------------------
Igor72
And to bend where and as it is necessary
-------------------------------------------------------------------------------------
And such variant generally most worst of possible - "shoulder" from a sucker to phone very big. Means it will shiver and be shaken permanently on any hummock. Not our variant, tea, not in  we live with their highways :gigi:

13

Re: Whether there are holders of phones on glass without a sucker?

Mitritch
And such variant generally most worst of possible - "shoulder" from a sucker to phone very big. Means it will shiver and be shaken permanently on any hummock. Not our variant, tea, not in  we live with their highways 
At me about such, truth is shorter, in   Anywhere it does not shiver, is not shaken.

14

Re: Whether there are holders of phones on glass without a sucker?

Mitritch :
It is easy to distinguish. The normal sucker is a translucent polyethylene round hogwash, and "crude rubber"  colors "a round hogwash" THICK and sticky

  a sticky hogwash call silicone :rotate:
Found under the link from translator still the holder on  and on  with a magnet

15

Re: Whether there are holders of phones on glass without a sucker?

- A fox -
Yes-yes-yes, here is how time second "hogwash" IT:up:

16

Re: Whether there are holders of phones on glass without a sucker?

translator
There are the holders interposed into a slot of CD-player.
At me such is - though also other firm - sometimes . A quite good variant.
Mitritch
Very inconveniently such layout of the Navigator, it is necessary to LOWER a head to look.
Not the fact. At me  costs highly + carrying out of the holder it is directed upwards.
So enough to transfer a sight to the lower sawn-off shotgun front, to hang for this purpose a head it is not necessary.
bc---
Came across variant UP LP-10 https://www.jd.ru/978123.html
Silicone rubber and like as rigid on  should be.
But itself did not try.

17

Re: Whether there are holders of phones on glass without a sucker?

As a result on Savelovsky the holder with a sucker bought any . On it thick, approximately in centimeter  sticky something, reminding very soft rubber. To tear off from glass it is difficult, even when led out  . In general, that is necessary!

18

Re: Whether there are holders of phones on glass without a sucker?

Mitritch
It is easy to distinguish. The normal sucker is a translucent polyethylene round hogwash, and "crude rubber"  colors "a round hogwash" THICK and sticky
Can set an example in what-thread large Chinese shop? Thanks! wink

19

Re: Whether there are holders of phones on glass without a sucker?

- KOSMOS -
Can set an example in what-thread large Chinese shop?
============================================================
I can not, therefore as itself bought in the Savyolovsky market in Moscow for cash. Any Alibabami did not use never:rolleyes:

20

Re: Whether there are holders of phones on glass without a sucker?

Here the such bought:
https://www.aliexpress.com/item/New-3M- … 0.0.wUb8W0
Like not bad kept, truth the machine sold in couple of months, I do not know as further myself moved. Was specific this piece - for the logger with screw fixing, but is and with "pincers" for the smart phone.
The price became paid delivery very unpleasant with introduction.

21

Re: Whether there are holders of phones on glass without a sucker?

bc---
Somewhere on open spaces  saw simple finishing of a sucker -
To take normal engine oil (from the canister, it is possible  it and to take from a cover) and
Accurately to lead on a sucker at edges (a circle of the big radius), it is possible simply a finger. And ALL.
The moisture normally all evaporates, therefore leakproofness of a sucker decreases.
And here - oil.
Itself tried - works is fault-free. smile)

22

Re: Whether there are holders of phones on glass without a sucker?

troll bam bam
Itself tried - works is fault-free. smile)
----------------------------------------------------------------------
You still did not try a sucker to smear it with juice of Garlic:up::gigi:

23

Re: Whether there are holders of phones on glass without a sucker?

troll bam bam
It suits, if the holder on glass to leave. And if to remove?

24

Re: Whether there are holders of phones on glass without a sucker?

bc---
And if to remove?
--------------------------------
What for to remove the holder? 10 years ago  the local tore out it holders from Navigators, is now quieter with it

25

Re: Whether there are holders of phones on glass without a sucker?

Mitritch
What for to remove the holder?
Hinders.