1

Topic: Again about a seat

As usual, whether I am not able to sit, whether does not carry, but the next seat broke. Seat AeroCool AC120 lived at me hardly less than year. Normally most feeble place is a fixing of "butterfly" (a metal platform) to sitting. But this time metal in a place where the rod incorporates to a horizontal was tore. For photos selected red a line of a lift-off of metal. As I understand, metal did not withstand loading when I was thrown off on a seat back. And it, by the way, regular possibility, a seat can be swung degrees on 20 back. The question actually in, whether is in the nature of a seat with a mighty, reliable steel in critical places that anything there it was not torn, did not break, did not come off. Such sensation that though cheap though expensive - it all in such places from one substance becomes. Are not able to do safety factor. The seat is declared on 150 kg. The maximum, but some engineering experience says that such nodes should be projected with very good store. With calculation that on it the load will somersault is powerful 300-400 kg. Then there will be a confidence, what hardly 100 kg there are more. Precisely withstands.

2

Re: Again about a seat

Hello, Michael7, you wrote: M> As usual, whether I am not able to sit, whether does not carry, but the next seat broke. Seat AeroCool AC120 lived at me hardly less than year. And I thought that only cheap office seats break...

3

Re: Again about a seat

Hello, Lazytech, you wrote: L> And I thought that only cheap office seats break... We do not know weight of the author and that it on it did

4

Re: Again about a seat

Hello, Michael7, you wrote: M> AeroCool AC120 By the way, how many it costs? Under the link there are no prices.

5

Re: Again about a seat

Hello, Submitter, you wrote: M>> AeroCool AC120 S> By the way, how many it costs? Under the link there are no prices. Somewhere about 15 thousand rbl.

6

Re: Again about a seat

Hello, Michael7, you wrote: M> Somewhere about 15 thousand rbl. So if the seat has less than year to exchange on a warranty?

7

Re: Again about a seat

Hello, Michael7, you wrote: for the house, decided for myself that the best seat is a stool, smaller chance to earn hemorrhoids from a sedentary life, well or a chair with a back (but on itself noted that never on a back I lean, all the same I sit as on a stool, only an ass is softer because of an undercoat on a chair.) forgive for

8

Re: Again about a seat

Hello, Submitter, you wrote: S> So if the seat has less than year to exchange on a warranty? And a warranty somewhere it is not known where, and  with an exchange will be.  it should be carried somewhere, and not the fact that accept.

9

Re: Again about a seat

Hello, Michael7, you wrote: S>> So if the seat has less than year to exchange on a warranty? M> and a warranty somewhere it is not known where, and  with an exchange will be.  it should be carried somewhere, and not the fact that accept. Well if 15  for you not money buy the new.

10

Re: Again about a seat

Hello, Submitter, you wrote: M>> And a warranty somewhere it is not known where, and  with an exchange will be.  it should be carried somewhere, and not the fact that accept. S> well if 15  for you not money buy the new. I will spend half of this total for a taxi. Actually, the check with a warranty I can not find and  where their affairs. Even by some experience, I will tell that get rid with a warranty on time-two.

11

Re: Again about a seat

Hello, wl., you wrote: wl.> for the house, decided for myself that the best seat is a stool, smaller chance to earn hemorrhoids from a sedentary life, well or a chair with a back (but on itself noted that never on a back I lean, all the same I sit as on a stool, only an ass is softer because of an undercoat on a chair.) wl.> forgive for  From a stool a waist is ill strongly.

12

Re: Again about a seat

Hello, Submitter, you wrote: S> We do not know weight of the author and that it on it did I not the heavyweight and with things I try to address accurately, but the first plastic seat, from cheap, lived at me all couple of months. The second, is more expensive and with a metal considerable quantity, stretched, , half a year, and the plastic sleeve in which the vertical steel tube rotates then burst. Tried was to splice this sleeve from spalls, yes does not hold... Taught by bitter experience, now I use normal, not rotating chairs.

13

Re: Again about a seat

Hello, Michael7, you wrote: M> From a stool the waist is ill strongly. When on a toilet bowl you sit, is ill nothing?

14

Re: Again about a seat

Hello, Michael7, you wrote: to Boil thoroughly a seam.

15

Re: Again about a seat

Hello, Michael7, you wrote: M> Normally most feeble place is a fixing of "butterfly" (a metal platform) to sitting. But this time metal in a place where the rod incorporates to a horizontal was tore. For photos selected red a line of a lift-off of metal. Search on demand of "piastre" + for model of your seat. I to myself already 2 times changed. The coolest - to remove to a piastre from the dowel. There is a good method - turn off  bolts, fay a blade on the puncher and do 2 second  directly in a piastre. It flies away for 2 seconds. If to remove without the puncher 2 foreheads and to shake here and there Are necessary some minutes, not  to a piastre from a seat.

16

Re: Again about a seat

Hello, Shmj, you wrote: S> Search on demand of "piastre" + for model of your seat. I to myself already 2 times changed. S> the coolest - to remove to a piastre from the dowel. There is a good method - turn off  bolts, fay a blade on the puncher and do 2 second  directly in a piastre. It flies away for 2 seconds. S> if to remove without the puncher Needs 2 foreheads and some minutes to shake here and there, not  to a piastre from a seat. Thanks. Somehow did not think at all to find this node. Finding where to weld thought, and simply to replace for some reason is not present. Was specific under the seat did not find while, but it is simple on the size and type like Top-gan-1 http://remontkresla.ru/product/mehanizm … n-1150200/ and visually very similar, though and not on 100 % approaches. I will try to replace.

17

Re: Again about a seat

Hello, Michael7, you wrote: M> As usual, whether I am not able to sit, whether does not carry, but the next seat broke. And I probably am able, never seats broke and at all I do not know as it to make. I sit on the IKEA rotating seat, which the cheapest and plastic at them. Acquaintances  stopped on "chair of the operator", that is a standard guest chair which at any office stand.

18

Re: Again about a seat

Hello, Michael7, you wrote: M> the Question actually in, whether is in the nature of a seat with a mighty, reliable steel in critical places that anything there it was not torn, did not break, did not come off. Ikea Markus, I use more than 6 years. The seat wore out, the seat was pressed through, the leather substitute high layer on a headrest grows bare. But mechanisms in perfect tune - neither are not present scratches, or gaps. I will change on same.

19

Re: Again about a seat

Hello, Submitter, you wrote: M>> From a stool the waist is ill strongly. S> when on a toilet bowl you sit, is ill nothing? You on a toilet bowl on 8 + hours per day lead? It is strong, the brother

20

Re: Again about a seat

21

Re: Again about a seat

Hello, Michael7, you wrote: M> the Question actually in, whether is in the nature of a seat with a mighty, reliable steel in critical places that anything there it was not torn, did not break, did not come off. Such sensation that though cheap though expensive - it all in such places from one substance becomes. Are not able to do safety factor. The seat is declared on 150 kg. The maximum, but some engineering experience says that such nodes should be projected with very good store. With calculation that on it the load will somersault is powerful 300-400 kg. Then there will be a confidence, what hardly 100 kg there are more. Precisely withstands. There are here such excellent office chairs. Unlike rotating seats on which even it is impossible to be thrown off by sense without risk, these chairs very convenient and there there is nothing to break - connections welded. Even if suddenly welding for any unknown reasons breaks, there simply enough to drill a hole and to connect a bolt and a nut.

22

Re: Again about a seat

Hello, Michael7, you wrote: M> As usual, whether I am not able to sit, whether does not carry, but the next seat broke. It is made for 10 seconds. I sit on former burst, and nowadays  a seat. At minimum skills of electroarc welding, it is possible to weld most. I and did. Flight normal. If you do not know from what side to take an electrode, drive in the nearest workshop. Or the neighbor in garage ask, yes simply ask somebody, you are able to cook? A maximum for 500 to you weld a crack. If someone the acquaintance more cheaply or generally it is free.

23

Re: Again about a seat

Hello, anonymouse2, you wrote: A> There are here such excellent office chairs. A> unlike rotating seats on which even it is impossible to be thrown off by sense without risk, these chairs very convenient and there there is nothing to break - connections welded. A> Image: x2990ae0e702899edd6420db8db532d77.jpg.pagespeed.ic.LD_CPFxAIn.jpg A> even if suddenly welding for any unknown reasons breaks, there simply enough to drill a hole and to connect a bolt and a nut. At them the back breaks. Well, it because I with the one hundred in kg  to program lying.

24

Re: Again about a seat

Hello, Michael7, you wrote: M> From a stool the waist is ill strongly. Probably you incorrectly sit (not directly). And it... It is necessary to rise.

25

Re: Again about a seat

Hello, anonymouse2, you wrote: A> There are here such excellent office chairs. A> unlike rotating seats on which even it is impossible to be thrown off by sense without risk, these chairs very convenient and there there is nothing to break - connections welded. A problem that all of them low. And desktops normally high, and  knees to lower at an angle 90 degrees to a floor.