1

Topic: The system takes off on the dark blue screen

One week ago the strange began.
At me on a disk of 2 systems: Windows XP and Windows 7 64 bit. C in different sections. In the core I work on the seven, but sometimes it is necessary and on XP. Some programs, etc.
Asus P5kDeluxe (775), costs Xeon,  . 6 Gig  (22, 21)
The computer worked half a year without upgrade and setting of new drivers.
And here glitches began. On the seven the dark blue screen began to appear. On it a sentence to remove the new equipment and to reinstall the driver and a BIOS. But I put nothing. Also did not install. And here XP worked without problems.
The computer could fall out at any time: both at loading, and in a safe mode, and after 10 minutes of operation, and in 2 hours. Happened and so. You load the seven, failure. You load XP, a pair of clocks you work, you overload on the seven, all is normal. You can work some hours without embarkation, and you can take off and in half an hour.
Decided that business in gland. But did not understand, in what: a board, video, a disk, storage?
Similar at me was when  a disk and sectors were strewed. Ran some times Victoria and ,  corrected, what were. The system continued to be strewed.
Then decided to change . Delivered other firm, other model. The dark blue screen disappeared. But time 5 minutes the computer became  on seconds 15-20. The mouse did not move, the image did not change. Then all drooped. Next day again the dark blue screen.
Found the old beaten disk with the same system. Changed. Again the dark blue screen at loading.
Tore out from the computer of 2 laths of storage on 1 . After the computer booted normally. Well there the system was recovered after failure. Yesterday all the day long worked without failures. Here also I think what further to do?
If will work without failures, all business in storage. But here in what? Laths, contacts on a board or the controler?
I will run at first laths. In different connectors. And there we look.
Something can at whom similar happened? With storage? Also what advise?
-------------------------------------------------------------
And you enclosed already the blood rouble in Bill Gates's 50 milliard state?

2

Re: The system takes off on the dark blue screen

Joss wrote:

something Can at whom similar happened? With storage? Also what advise?

When the computer begins so , it is necessary to take out and interpose all connectors, especially storage, to wipe their spirit that can.
"Electronics - a science about contacts", as they say in old It-shnoj to a proverb, transistors in processors do not break.
Still, setting of 2 laths of storage on the channel demands attentive selection of laths; with one on the channel any work, and here on 2 there are problems. However, at you hardly this situation since the computer worked half a year.

3

Re: The system takes off on the dark blue screen

Here not only storage it is necessary to check already, and and , , the processor (paste to change), the screw.
Etc., etc.
Begin with  by changeover on more powerful and certainly working.
If does not help - to change all components (see above by turns).

4

Re: The system takes off on the dark blue screen

Well  at me is, but the same capacity. Paste on  changed half a year back when upgraded the computer. It is possible to wipe contacts. So I will begin with them. Only me learned to wipe them  an elastic band. There is at me still a pair of laths on Gigu. It is possible to try to replace with them. Once at me stood 41, but it was required to expand storage. I search still for pair 2  laths.

5

Re: The system takes off on the dark blue screen

Joss wrote:

I Search still for pair 2  laths.

it is better to deliver 2*8, 775 it supports? Or 2*4, it supports precisely.

6

Re: The system takes off on the dark blue screen

d7i wrote:

Begin with  by changeover on more powerful and certainly working.

Personally I would begin with utility usage bluescreenview, as change  the curve driver
Does not cure.

7

Re: The system takes off on the dark blue screen

alexeyvg wrote:

it is passed...
It is better to deliver 2*8, 775 it supports? Or 2*4, it supports precisely.

My board supports only 8 Gig, so 4 on 2 Giga - an optimal configuration. As percents of Intel that many Chinese light versions under AMD do not go.

8

Re: The system takes off on the dark blue screen

Joss wrote:

the computer worked Half a year without upgrade and setting of new drivers.

So  the driver...

9

Re: The system takes off on the dark blue screen

Dimitry Sibiryakov wrote:

Personally I would begin with utility usage bluescreenview, as change  the curve driver
Does not cure.

There are no curve drivers. I generally the conservative and if the technics works without problems I do not aspire to change old on newer which can be with problems.
bluescreenview - certainly not bad to esteem, but I read the screen. Besides, computer embarkation even a safe mode forces to doubt loading process that the driver are at the bottom of failure.
And here that that 32 bit XP works without failures as though that with storage above 3 Gig there can be something not as it should be hints.

10

Re: The system takes off on the dark blue screen

wrote:

6/14/2018 12:37, Joss writes:
> And here that that 32 bit XP works without failures as though that with storage above 3 Gig there can be something not as it should be hints.
64-bit Win-7 on half of storage works stablly?

Was 2 on 2 and 2 on 1. Took out 2 on 1. There were 4 Giga. Day (night is more exact) worked without failures. (Set the long task on coding) Otshchyolkala continuously 6 hours.

11

Re: The system takes off on the dark blue screen

Joss wrote:

it is passed...
My board supports only 8 Gig, so 4 on 2 Giga - an optimal configuration. As percents of Intel that many Chinese light versions under AMD do not go.

Then 2 on 4 Giga - an optimal configuration. It will precisely work stablly with any laths (certainly, 2 laths should be from one batch).

12

Re: The system takes off on the dark blue screen

alexeyvg wrote:

it is passed...
Then 2 on 4 Giga - an optimal configuration. It will precisely work stablly with any laths (certainly, 2 laths should be from one batch).

At me storage DDR2. And I for 2 years saw only one lath on 4 Gig approaching to Intel. And cost at it was almost in 2 times above, than at a lath for AMD. It not in shop, and from hands.

13

Re: The system takes off on the dark blue screen

Joss wrote:

....
At me storage DDR2. And I for 2 years saw only one lath on 4 Gig approaching to Intel. And cost at it was almost in 2 times above, than at a lath for AMD. It not in shop, and from hands.

Miracles you any . Never saw that on storage laths would specify "for AMD", "for Intel". There are frequencies on which works + .
And at the approach: bought privately that got, stuck in the computer - the dark blue screen is absolutely natural.

14

Re: The system takes off on the dark blue screen

wrote:

storage in BIOS is exposed with "alternation" (dual channel)?
Laths from special "conjugate" sets, or normal ?

At start  writes dual channel. And Plancks at me from a scattering, instead of steam rooms. Now DDR2 under , moreover and steam rooms at us to find it is problematic. And the price very much bites (at least for me)

15

Re: The system takes off on the dark blue screen

Leonid Kudryavtsev wrote:

Miracles you any . Never saw that on storage laths would specify "for AMD", "for Intel". There are frequencies on which works + .
And at the approach: bought privately that got, stuck in the computer - the dark blue screen is absolutely natural.

On laths that do not specify, but if rummage around the Internet find the information on it. On laths for AMD there is any controler (I do not remember precisely). They and with  work, only involve half of the capacity. I about it learned not at once. And normal sellers ask, "to you for Intel or AMD?" It that reset was not.

16

Re: The system takes off on the dark blue screen

Leonid Kudryavtsev wrote:

and at the approach: bought privately that got, stuck in the computer - the dark blue screen is absolutely natural.

2 Gigovye work for me 3 years, 1  - 5. And in this configuration half a year worked without failures. So your remark not absolutely in a subject.

17

Re: The system takes off on the dark blue screen

Joss wrote:

it is passed...
2 Gigovye work for me 3 years, 1  - 5. And in this configuration half a year worked without failures. So your remark not absolutely in a subject.

The percents selected wrong . Any unit turned out  (worked on faster , than it is necessary to it), there came summer/ascended layout of planets/temperatures hardly podnjalas/naprjazhenie hardly luna/was replaced reduced, the unit began .
IMHO

18

Re: The system takes off on the dark blue screen

Leonid Kudryavtsev wrote:

the Percents selected wrong . Any unit turned out  (worked on faster , than it is necessary to it), there came summer/ascended layout of planets/temperatures hardly podnjalas/naprjazhenie hardly luna/was replaced reduced, the unit began .
IMHO

At me all laths DDR2 800 (6400) is the maximum frequency supported by a board. I am not engaged in acceleration. I do not experiment pressure and frequency. As the lath could leave on the raised frequency, I do not represent.