76

Re: ZyXEL NBG460N.

Certainly.
With passthrough - understood... At me such is not present))))

77

Re: ZyXEL NBG460N.

Question,
In a subject is USB?
More precisely I know that there it is not present (looked reviews) but can simply is not unsoldered?

78

Re: ZyXEL NBG460N.

[img=200x197, 42,4Kb] http://vfl.ru/i/20101015/3b6814c2320048 … 32_1_s.jpg [/img]

79

Re: ZyXEL NBG460N.

Nobody tried insertions ftp://ftp.zyxeltech.de/2.new_mirror/NBG-460N/firmware/ on x550 to flood?
From Russian I flooded, , now costs
system Name: X550N
Firmware Version: V3.60 (BFL.1) | 07/06/2010,
In NBG-460N_3.60 (AMX.8) C0.zip like  802.11n draft.
And that at me  and does not want couples more than on 54 though writes 802.11n and  if to direct on SSID in Win7

80

Re: ZyXEL NBG460N.

Access_PC:
At me an europas
System Name: NBG460N
Firmware Version: V3.60 (AMX.8) | 08/23/2010
In  such  http://www.buffalotech.com/products/wir … li-uc-gnm/
It is connected on N, but only on 65 (on 20Mhz I so understand, a router jota costs 20\40), but it is a problem in  since it too is connected to point TPLINK only on 65

81

Re: ZyXEL NBG460N.

Sewed last from the specified site, without changes.
At me in  intel 5100 agn, about it just also it is written that too small transit velocity in it to an insertion .
But changes are not present. Strange as that.

82

Re: ZyXEL NBG460N.

Access_PC :
Sewed last from the specified site, without changes.
At me in  intel 5100 agn, about it just also it is written that too small transit velocity in it to an insertion .
But changes are not present. Strange as that.

It not the router is guilty, most likely in your adapter the mode "n" is blocked, it became now fashionable to put wifi adapters in notebooks with blocked "n", Windows shows that connection 802.11n, but speed thus shows 54. Here there are subjects devoted to a mode unblocking "n" on intel', atheros' and broadcom', but notify at once, reinsertion EEPROM is required to some adapters....
Adding from 10/16/2010 14:01:

dmitro_379 :
Question,
In a subject is USB?
More precisely I know that there it is not present (looked reviews) but can simply is not unsoldered?

Yes, it there is not unsoldered, but if it there to solder, it is the equal account that does not change since there is no support USB in microprogram NBG460N....

83

Re: ZyXEL NBG460N.

Yes this USB especially also is not necessary.
it is better to swing the human client where all is properly adjusted - the same uTorrent. Web Ovsky rocking chairs  terribly castrated, and control utilities to them (is is, it is finite) - inconvenient and not informative. Tried some times, terribly it was not pleasant. Refused to that pore while someone does not make AJAX a web-mordru for a rocking chair so convenient and functional, as the interface  clients.
To make the file server it is possible and without USB (at me and it is made; and at all one).
Print-server - "one-sided" and places restricted strongly/curve compatibility with printers (at all vendors).
Remains only WAN Backup through the USB-modem 4G. Here it personally sometimes does not suffice me, when the provider falls.
In remaining absence of USB-port personally does not confuse me generally. And when I sat on RT-N16 port USB at me have not been involved absolutely not.

84

Re: ZyXEL NBG460N.

Today it was necessary  different LiveCD on a hospital, actually after that all I load OS in a normal mode and I see "a network cable it is not connected". Went pulled wires LAN, changed nothing, in a router does not start up, wi-fi judging by indicators worked, took out a router supply, further it turned on also all became normal....... An interesting glitch.
Insertion: from 07.23.2010

85

Re: ZyXEL NBG460N.

Fakef0rm
....... An interesting glitch.
It is connected, most likely, to different modes of power savings  cards in LiveCD and in  OS.
At me (for a long time, years NN back) was  on a hospital - at reboot from one axis in another there was a similar situation.

86

Re: ZyXEL NBG460N.

Let's will  that it really because of it. Thanks.

87

Re: ZyXEL NBG460N.

EIKA
Nevertheless I just thought of connection of the printer and as there there is no network connector that through USB.
Can and would not quit anything but in this case you will not try at all.
Well that asked., Probably, I will look aside 825.

88

Re: ZyXEL NBG460N.

[off] at me the printer is connected to NAS. Sense that is 24/7 working +, well and  irrespective of the main computer electricities are swung minimum loss... [/off]

89

Re: ZyXEL NBG460N.

In our city  launched iptv. On a router assigned port under IPTV. All works perfectly, BUT:
I to a drawing room have one cable from a router (from the specified port). Earlier on it the media player hung. Delivered a switch in a drawing room and hoped that both devices will work. Unfortunately quitted not so. The player a network does not see.
Adjustment experience iptv is not present any smile, therefore a question - whether there is a possibility to see in a house network those devices which will be on the port specified as "TV"?
Or there is any other method of "start" iptv in a house network?

90

Re: ZyXEL NBG460N.

[q=mikhailss] Acquired yesterday the given subject, the insertion stood 360BFL1D0_20100706, at attempt of reboot a web muzzle or recovery of a configuration from a file leaves in cyclical , changed an insertion on 360BFL1D0_20100723, changed nothing. What to do??? One more moment was clarified, the router leaves in  at lifted either pptp, or l2tp connection only when is included Wireless LAN (Wi-Fi). If WI-FI it is ungeared,  transits freely STILL the moment if it is launched unguarded Wi-Fi - all normally. It is necessary to launch with enciphering-kaput, a router you will not reboot ([/quote] All it was wonderfully resolved by setting of March insertion V3.60 (BFL.0) D0_20100322 | 03/22/2010. Works ideally, *3

91

Re: ZyXEL NBG460N.

mnemonic
I to a drawing room have one cable from a router (from the specified port). Earlier on it the media player hung. Delivered a switch in a drawing room and hoped that both devices will work. Unfortunately quitted not so. The player a network does not see.
also should not see. As he at you in   looks, instead of in a house network. This daw as I understood  WAN port through instead of a separate switch before a router. So it is necessary to drag a separate cable.

92

Re: ZyXEL NBG460N.

Insertion :
System Name: NBG460NEE
Firmware Version: V3.60 (BFL.1) _20100723 | 07/23/2010
In device adjustments the wireless network with following characteristics is launched:
- Security Mode: WPA2-PSK
- WPA Compatible
- Pre-Shared Key: the code of 63 digits is installed manually
- ReAuthentication Timer it is not changed and there is digit 0
Mode MAC Address Filter is included and are registered corresponding MAC addresses of wireless devices
The various wireless devices supporting both a mode 802.11g, and the devices supporting up to 802.11n enter into a network. For these purposes in the menu: Network> Wireless LAN> Advanced the option 802.11 Mode is installed in 802.11b/g/n
In menu Network> DHCP Server> Advanced to each device the is reserved IP the address
In a mode when the wireless network is not hidden ( Hide SSID not installed) HTC Desire smart phones (OS Android 2.2) and HTCs Wildfire (OS Android 2.1) see and are connected to a wireless network automatically without problems. It is necessary to install tick Hide SSID, i.e. to make a network invisible as both these devices cease to see a wireless network and do not find it
In what there can be a problem?

93

Re: ZyXEL NBG460N.

And if manually to enter a title? It seems to me automatically they and should not be connected to it. I faced the such for  500gp.

94

Re: ZyXEL NBG460N.

MySelfGOOD
And profiles on connection in gadgets that are created on this network? Or you the automatic machine - as with open networks? If the automatic machine the network can is not. And in profiles, by the way, sometimes there is such adjustment as "To be connected to a network even if it does not conduct an announcement". If is, she should solve all.
Adding from 10/17/2010 14:27:
mnemonic
I to a drawing room have one cable from a router (from the specified port). Earlier on it the media player hung. Delivered a switch in a drawing room and hoped that both devices will work. Unfortunately quitted not so. The player a network does not see.
Switch on LAN-port NBG delivered or on a cable from a Biline? If put a switch on a cable from a Biline it will be possible to remove from it IPTV on a prefix, and one cable available for you from NBG to leave for a media player as well as was earlier.

95

Re: ZyXEL NBG460N.

I in  do not have such daw sad
upd: after entered a network title manually - it began to be connected to the latent network of a router automatically. In properties of a network  such daw is.
So now I had one more level of protection  smile
Adding from 10/17/2010 14:38:
EIKA
If put a switch on a cable from a Biline it will be possible to remove from it IPTV on a prefix, and one cable available for you from NBG to leave for a media player as well as was earlier.
As I understood sense that it would not be desirable to lead a separate cable for a prefix and to use this, dissolving through a switch on a prefix and a player.

96

Re: ZyXEL NBG460N.

e-vred
As I understood sense that it would not be desirable to lead a separate cable for a prefix and to use this, dissolving through a switch on a prefix and a player.
Sense such that is not known whence at it a Biline cable goes (from the point of view of a spacer on ). At me it goes so that at first it is possible to connect a prefix to it, and then already to pull one cable to a router (on WAN). To pull two cables from a router, to connect a player and a prefix, it is not necessary for me, for it is silly.

97

Re: ZyXEL NBG460N.

mnemonic
I to a drawing room have one cable from a router (from the specified port). Earlier on it the media player hung. Delivered a switch in a drawing room and hoped that both devices will work.
Sense such that is not known whence at it a Biline cable goes (from the point of view of a spacer on ).
Like all it is clear that to a drawing room where the prefix and a player are installed there is a separate cable.

98

Re: ZyXEL NBG460N.

McMCC - All is very simple, resources of devices are not borderless, who does not want to incur responsibility if these resources sharply end, and all declared functional will not work. So to shoot here not whom, miracles in the nature do not happen, it is necessary to pay for all, or enthusiasts with alternative insertions to you in the help without what or warranties and responsibility from their side or to search for devices which satisfy to your needs, and the vendor for it answers.
And as your remarkable insertions for Akorpa 120-422, there resources was even less, and a functional such as it is necessary. I permanently regret that it was necessary to pass on  with , because of it. Really it is impossible to write an insertion for a router with a functional, , Akorpa 422 V2?
I, for example, long and unsuccessfully, search for a router which can lift two  connections simultaneously and normally  at connection loss. Really Domolink, it TsentrTelekom, with which it is necessary for operation, so insignificant command that any vendor does not pay to it attention. Normal, ADSL modem Akorp 120, all it can on time-two, and the router is not present, well it is natural SOHO a class though it even with brown modulations should not be fooled, already .
Can revive to you old tradition - "an insertion from McMCC", two candidates on a national router, already are NBG460N and TP-WR1043ND, and there and the people ? smile

99

Re: ZyXEL NBG460N.

e-vred
EIKA
The cable  enters into apartment and directly at doors there lives a router. Further from it in a drawing room in a strainer the cable is laid out. A switch to put before a router there is no need any. All the same the second cable turns out is necessary.
Similar it is necessary to fence for a player powerline.

100

Re: ZyXEL NBG460N.

mnemonic
Well in your case yes, the second cable, Wi-Fi or Powerline is required.