276

Re: fujitsu-siemens ESPRIMO Mobile U9200

Svin2008
All right, the modem similar in this configuration is not present.
What custom number at it 7
Adding from 11/19/2008 14:58:
Svin2008
All right, the modem similar in this configuration is not present.
What custom number at it 7

277

Re: fujitsu-siemens ESPRIMO Mobile U9200

Dear owners, prompt
1. Whether it is possible at desire to take out DVD - to facilitate the machine?
2. What maximum resolution of video at an output to the exterior monitor? Possibility to look FullHD cinema on the big numeral TV set through port-replicator interests, there like as is DVI.

278

Re: fujitsu-siemens ESPRIMO Mobile U9200

IC69
1. It is impossible sad
2. On the TV set did not connect, but through a replicator on other monitor, holds 1600 on 1200.

279

Re: fujitsu-siemens ESPRIMO Mobile U9200

IC69
1. Theoretically - it is possible. Even there is an option - weight saver (stub). As it looks in a reality - .
2. 19201200 ( http://sp.fujitsu-siemens.com/dmsp/docs … _u9200.pdf )

280

Re: fujitsu-siemens ESPRIMO Mobile U9200

IC69
I join all told VarenikOFF .
weight saver - a factory option, I do not know probably it to order through the service channel... Is not present more soon!
Now series U9200 was updated on U9210 there a modular design how at LifeBook, can, it is necessary to pay to it attention?

281

Re: fujitsu-siemens ESPRIMO Mobile U9200

infinityx
I do not know probably it to order through the service channel... Is not present more soon!
Most likely, only on its service channel also it is possible to order.
U9200 it was updated on U9210
By the way, U9210 leaves more pleasant impressions, rather than U9200 so it is necessary to pay attention to this device.

282

Re: fujitsu-siemens ESPRIMO Mobile U9200

IC69
infinityx
weight saver - a factory option, I do not know probably it to order through the service channel... Is not present more soon!
It is possible. How much I understand, it it: 38004039/6051B0213201/DUMMY FOR ODD

283

Re: fujitsu-siemens ESPRIMO Mobile U9200

284

Re: fujitsu-siemens ESPRIMO Mobile U9200

Being returned to sound U9200.
A little bit it was possible to lift a scent of microphones setting of the last driver, WDM_R209 (5.10.0.5735), appeared . An option - "microphone gain". In , in sound adjustments if all on a maximum and to disconnect autotune, shows almost full scale (a normal voice from distance 40), but in a reality all it is necessary to shout. Strongly depends on a voice timbre, it is possible to tell microphones this a current for women and children. A low man's voice practically do not perceive.:mad: smile
Somebody already changed speakers? What should be put where to buy? That at least mid frequencies normally played back, the cinema in the plane  is not audible.:confused:

285

Re: fujitsu-siemens ESPRIMO Mobile U9200

[off] Button
Killing fans to look in the plane I will throw without earphones
[/off]

286

Re: fujitsu-siemens ESPRIMO Mobile U9200

grannie
Button
Killing fans to look in the plane I will throw without earphones

:gigi:

287

Re: fujitsu-siemens ESPRIMO Mobile U9200

grannie :
[off] Button
Killing fans to look in the plane I will throw without earphones
[/off]

big_smile:gigi::D. In nature.
Wanted neighbor in cognac to show, how we , and figs there. It was necessary to it  to give ears.:beer:

288

Re: fujitsu-siemens ESPRIMO Mobile U9200

Bought
Fujitsu-Siemens Esprimo U9200 (U9200MPHV2RU) 12.1"WXGA / Pentium Dual Core T2390 (1.86GHz) / 2Gb / 160GB / DVD Super Multi / FM / Lan / WiFi / BT / Camera / Vista Basic / 1.8 kg
That I can tell
+ The quite good screen, productivity
-The sound any, quality of the assembly simply worthless, and the main thing did not work days, it began possible to hang up and ungear only pushing
On the button of the panel and then does not cool down yet  turned on and the screen is not present, here so.
it can such batch or , delivered it reversely and took Toshibu 300 though also the screen 15 (it would be desirable 12) but quality, the excellent sound, the quite good screen and are present no problems.

289

Re: fujitsu-siemens ESPRIMO Mobile U9200

Bought Fujitsu-Siemens Esprimo U9200
T5450 (1.66/1024/120 5400)/DVDRW/WiFi/BT/cam/VistaHB/12.1 "WXGA
Delivered in addition 1Gb storages.
Stitched  1.11.
Installed VHB without  programs which have been installed initially.
Unusually that it has screen latch, but as a whole is fixed reliably that in the closed state that in the opened. When it is closed works  the mechanism, therefore if not to adhere, it is possible to strike the screen on the case.
From the positive moments:
+ The good screen (is with what to compare - in a profile).
+ Almost silent, it is possible to leave  for the night though the notebook and costs near to a bed.
+ Quite good productivity
From the negative moments:
- Tonal quality -  to use earphones.
- The power unit, the big, 90 W, moreover also is strongly heated. At mine  (a config in a profile) the unit about same, only is heated hardly less, but at it the discrete videocard and a stuffing more abruptly.
tuz-i
Bought
Fujitsu-Siemens Esprimo U9200 (U9200MPHV2RU) 12.1"WXGA / Pentium Dual Core T2390 (1.86GHz) / 2Gb / 160GB / DVD Super Multi / FM / Lan / WiFi / BT / Camera / Vista Basic / 1.8 kg
That I can tell
+ The quite good screen, productivity
-The sound any, quality of the assembly simply worthless, and the main thing did not work days, it began possible to hang up and ungear only pushing
On the button of the panel and then does not cool down yet  turned on and the screen is not present, here so.
it can such batch or , delivered it reversely and took Toshibu 300 though also the screen 15 (it would be desirable 12) but quality, the excellent sound, the quite good screen and are present no problems.

About quality of the assembly of anything bad I can not tell - not worse than at others  that were at me, gaps are not present, it is easy possible to lift one hand for edge - creaks nothing.
Concerning switching-on - of shut-downs - similar yet did not note, though  yesterday worked very long and it was heated - it was stitched , the Windows, updates for it, a software, and in the end a defragmentation were installed. All fulfilled normally, the case warmish - can be held easy in a lap.
IC69
Dear owners, prompt
1. Whether it is possible at desire to take out DVD - to facilitate the machine?

At desire - it is possible, it is necessary to unscrew 1 screw, and DVD easy driving of a hand it is possible to pull out. I will photograph a bit later.
Misters owners given , can we cooperate and we write FAQ and the review?

290

Re: fujitsu-siemens ESPRIMO Mobile U9200

I bought this miracle.
At first looked at Lenovo S10 and even on HP 2133, but then all the same took this kid.
Not very big, but high-grade , instead of any .
I see, here to me all has been told, but the observations I will describe.
1) At my device the slot under a SIM-card is, but 3G the modem all the same misses.
2) the Keypad caves in in two points a little, but it is tolerant.
3) the Screen qualitative enough, though also glossy.
4) the Lower part of the case is very qualitatively assembled, does not cave in anywhere and not . The battery does not dangle.
5) On a cover (as already it was told above) there is a feeble place, opposite to which  divorces at pushing a cover. So to drag the device it is necessary carefully.
6) In a box with  the second beautiful box in which there was a SECOND GIGABYTE of storage was found out. What sense - I do not know. In a price anything about it was not. Probably, "a gift from Uncle Ljao".
I will make a photo - I will lay out.
7) Apparatets rather bright (and to compare is with what) though  I did not test.
Crysis too yet did not put.:gigi:
8) two not clear connectors (probably, they were already described in a subject, but I passed) were below found out. The first - behind a rubber stub - it is similar, under dock-station or a replicator of ports. The second - behind a small removed cover - under any battery. Any bay under this battery nearby it is not watched. I can assume that a certain exterior battery should be interposed into a connector large:eek: the sizes which fastens from below to . A question to experts: whether so it?
VarenikOFF , there it is behind written Reg. No S11D
Core2Duo 5450/1Gb/120G/GMAX3100/VHB
Ignor , Good idea.:up:

291

Re: fujitsu-siemens ESPRIMO Mobile U9200

Bought not for a long time it,  the keypad left corner (there where Esc) has a gap and slightly jingles in this place when  on , the trifle, and enrages terribly. This gap is at whom  still, or to me so carried?

292

Re: fujitsu-siemens ESPRIMO Mobile U9200

sarmat
In this model Fujitsu-Siemens Esprimo U9200 (U9200MPHV2RU)
At me too was and the keypad a little in this place, simply any spoilage failed...
It seems to me that fakes get, never thought that the Fujitsu can have such quality.

293

Re: fujitsu-siemens ESPRIMO Mobile U9200

Disassembled . Interesting singularities were found out.
At first to reach the main nodes (the processor, a psi-express train), is enough to remove the keypad. It in 9200 is not screwed, keeps narrow  over the keypad. That it to remove, it is necessary to open a cover of degrees on 120, to push __ a loop (I began with right), and sideways (from an end face ) to hook it something of plastic card type. Well and carefully raising  to move ahead to the left. Found out experimentally. But now I know as to remove the screen smile
The keypad. I do not know that more curve - the keypad or a surface under it. Supposed  on equal desktop - that it concerned a surface three points. Aligned, it became better, but all the same dangles. Multiplexing is necessary. Pasted insulating tape small squares in those places where most of all there was a sag. For an equal state it was necessary to select an amount of layers of an insulating tape experimentally. In region  - approximately 10. But the gap practically disappeared. Why practically - approximately and  it it is not visible, but on a sound those places under which there is a multiplexing very strongly differ from where it is not present. I.e. Esc now generally silent, and is closer to the button middle sound in an old fashion. It will be necessary to make somehow on all area multiplexing.
The modem. In my configuration it is not present. But, strangely enough, antennas are. Both are installed in a cover, from them there are wires, on the ends there are connectors which are protected by caps. Wires approach to the free connector miniPCI-E. To , wifi antennas too two. And, a microphone too two. Small holes on cover corners are microphones. And one black, another - white smile.
To take out DVD for simplification - it is almost senseless, it very easy.

294

Re: fujitsu-siemens ESPRIMO Mobile U9200

Svin2008
I Can assume that a certain exterior battery of the large sizes which fastens from below to  should be interposed into a connector. A question to experts: whether so it?
See a picture
[img=580x435, 28,6Kb] http://212.66.5.7/mediaserver/media/222 … ery_lo.jpg [/img]
2All:
Concerning the keypad there is service-bulletin SB-M-08017. If it is short - sometimes the upper lid is latched at the assembly not up to the end. Push a finger a cover approximately over keys F1 and F2 to :shuffle: do not consult - drag in .

295

Re: fujitsu-siemens ESPRIMO Mobile U9200

grannie
, helped! Pushed there where you told, there, that that clicked also all - a gap and a rattling disappeared. Thanks big. And where this service  ? Can there still, what useful is?

296

Re: fujitsu-siemens ESPRIMO Mobile U9200

sarmat
And where this service  ?
At service center smile))

297

Re: fujitsu-siemens ESPRIMO Mobile U9200

sarmat
And where this service  ?
In open access - anywhere. .
Can there still, what useful is?
On U9200 like more anything essential. Like even there was an explanation as CORRECTLY dock to snap, there too all is not simple:shuffle:
Yoprst, helped!
If you to me tell serial number the device I will issue on this business repair and I will earn a money:gigi: If who did not understand - a joke.

298

Re: fujitsu-siemens ESPRIMO Mobile U9200

grannie :
If you to me tell serial number the device I will issue on this business repair and I will earn a money:gigi: If who did not understand - a joke.

in each joke - there is a joke share:). By the way, thanks for  on mho-shop about DOCK for Esprim. Now I am am tormented by the TOAD! smile

299

Re: fujitsu-siemens ESPRIMO Mobile U9200

grannie to speakers 9200 how to steal up?
With what them to replace, that the cinema was normally audible?
.. With hands everything is all right, simply I know that opening of different devices can have counters, - imperceptible latches, sequence of actions and ....

300

Re: fujitsu-siemens ESPRIMO Mobile U9200

Button
No concept I have:shuffle: Itself it was never picked, and in service-manual to climb frankly laziness:rotate: