You are not logged in. Please login or register.
Thanks for a bonus. There was a small question how to change T option Max Read Latency (NCLK)., at reduction of this value by program AMD OverDrive speed of storage increases a little more, value of latency changes c 72,0 ns on 68,9 ns. is saved, and the gain is a little. Here a little also it would be desirable it. it is grateful.
collpc , Max Read Latency the Typhoon it is impossible to change, because this parameter is not defined in SPD. OverDrive changes it through register DRAM Control Register of northern bridge in the processor. Probably, I will add this parameter to an existing dial-up DCT Tuner the Typhoon.
Thanks huge that listen to simple users. I will wait for all small changes in your program. Thanks and .PS. behavior of my restitched units on platform Intel. of productivity just as on logician AMD within 8-10 % depending on the test, but small but: such that all tests on AMD as though give-time passages of tests faster, and the result is less and on the contrary on Intel time of passage of tests longer, and tests show result. I understand that the processor architecture to that a principal cause but whether is not present at you personal reasons on thin adjustment of values: CAS#Latency ,RAS#toCAS,RAS#Prechage,tRAS,tRC for various platforms. I will be grateful for your helps. Thanks.
collpc , we tell so, acceleration is other subject, to go deep in which, unfortunately, while there is no possibility. New iron leaves hands also quickly, as well as gets to me personally. You have time to test only a software and to rectify errors in the code. Therefore, alas.
Thanks, good luck in software development. we are engaged!!! Yes if make changes to existing dial-up DCT Tuner of the Typhoon somewhat quicker. 
, misters.
I the beginner in an insertion of units of storage though it is technically competent and am not afraid to short contacts and to sew different electronics Now to business.
I have absolutely identical two units of storage from an old beech: Hynix of 512 Mb.
One unit began (hangs up system) Defined it of 100 % authentically - alternately including units and carrying out tests and loadings. A verdict - an ode the lath , produces errors in different tests.
Question: whether It is possible to try to recover the Typhoon serviceability laths? A method of insertion SPD from a healthy lath on the patient?
...Or it is not necessary ? What probability that a problem in lath "brains", rather than ?
dexmorf
Whether It is possible to try to recover the Typhoon serviceability laths? A method of insertion SPD from a healthy lath on the patient?
Simply it is possible so to take and stitch, but this method gives the most least probability of success. However for the account various shifts in an insertion it is possible to disconnect a part of chips of storage of the unit and by that to get rid from "a beaten" chip. Naturally, the unit capacity will be reduced accordingly.
Good evening. I ask vjungle to answer on such : in conference Overclockers.ru
SEARCH SPD FOR A PROM OF OPERATIVE STORAGE -
Today Thaiphoon Burner 7.0.1.0 with a new observer of insertions SPD Browser 4.0. The new observer allows to download offline-base of insertions SPD for units of manufacture of Micron Technology c a site of developer Thaiphoon Burner. At present the amount of insertions is 589! Thus, in SPD Browser it is possible to discover insertions in two bases - native and original firm Micron. The appropriate switch between bases is in the main menu "Database" windows of an observer of insertions. Whether I Thaiphoon Burner 7.0.0.0 has possibility to use these 589 insertions.
collpc
Certainly. Download archive with new version 7.0.1.0 and unpack in the separate directory. Copy in this directory file Regdata.rkf of registered version 7.0.0.0. Then version 7.0.1.0 picks up your previous registration.
To use basis of Micron, launch SPD Browser, select from main menu Databases option Micron Original Database. Now we push button Download and we download basis with original insertions.
And tomorrow by the evening will be new in number of 680 pieces.
Thanks for efficiency!!! All made as you specified-writes DEMO!!!
Many thanks vjungle. work on hurrah!!! Basis Micron while is inaccessible. Yes if it is necessary I can add to your basis an insertion of the units in .
collpc
Basis of Micron updated. The amount of insertions totals 742. Launch SPD Browser, push on keypad F2 (the same, as Database-> Original Micron Database), further push button Download panels of an observer of insertions - downloading of a file of basis SPDDBMC.tdb begins. Reversely to switch to native basis of the Typhoon (SPDDB20.tdb) push F1.
Thanks! Now all works on 100 %! Bases simply !
collpc
To an output of the Typhoon 6.5.0.0 the program which in an automatic mode was connected to the Micron site has been developed, downloaded HTML-pages with SPD for each firm unit, a HTML-code and saved the data a ready SPD-insertion. At that point in time Micron possessed enormous basis of insertions, more than 3000 pieces! Among insertions even were with a suffix-ES (Engineering Sample). However after version 6.5.0.0 output it is literally in 2 days Micron deleted the order of 300 insertions from basis. And now them at all remains 742. It is natural, then I decided to be reinsured and to the announcement of the Typhoon 6.5 merged the order of 3000 insertions. However, much to our regret, all of them have been in a random way remote from a hard disk:confused: anew it was not represented possible since Micron and complicated formation of hyperlinks on page with SPD. And here now in forgotten it was discovered treasured with those 2913 original insertions! 
Among them the insertion and to your unit was discovered. And even in three audits Tomorrow wait basis upgraded version!
Adding from 2/1/2011 14:07:
The basis with original insertions Micron is updated! An amount - 3311 pieces! It is unique and fullest basis!
Thanks I will bomb now basis Micron:) the Joke!!!
vjungle
Thanks huge for your work. Bases Micron were studied by the whole evening. Flooded an insertion from PC3-10700H, Thaiphoon Burner 7.0.1.0 corrected in F, and about a miracle the manager of devices found the new equipment that in the previous case and added in productivity under test AIDA64, MaxxMEM2. I look forward your researches on adding of section Max Read Latency in the program
collpc , good news, thanks! An option for editing Max Read Latency I will add on days off. Judging by the documentation, anything difficult is not present. The algorithm of decoding of markings of Micron units for an output of the finite information in the report is now improved.
As well as promised, added regulation Max Read Latency in DCT Tuner. Processors Family 10h (AM2r1, AM2r2, AM3r1, S1g3, S1g4, ASB2, etc.), Family 11h (S1g2), Family 12h (FT1 - Ontario) and Family 14h (FS1 - Llano) are supported.
vjungle
As well as promised,
On your site the novelty is not found out yet.
And you likely could get the driver's license to the first record in this subject and there to change the link to actual version Thaiphoon Burner.
On any - Thanks for your program
pogvl ,
Yes, on a site while anything is not present. Here the link on TBSB 7.0.1.1 0205.
Profiles DCT of Tuner prior versions of the program are not compatible with new since it was necessary to expand structure of a dcts-file for storage of profiles.
vjungle
Many thanks for Max Read Latency. to estimate to the full your work. Yesterday there was a first Saturday of February-meeting of graduates of schools in all space this holiday mark, the head bu-bu:beer: today is a little I will be in shape and I will be engaged closely in an aaplet.
vjungle
Thanks for operation! Depositing of section Read Latency in DCT Tun simply balm on a wound. The increase to speed of operation of units of storage though is insignificant but as a whole with restitched values CL, tRCD, tRP, tRAS, tRC and CR it is a noticeable increase in systems.
Read all subject, such question: - at reading SPD all bytes are hammered FF, and and in program Thaiphoon, and in program SPDTool. Storage: Qimonda 64T64000HU3.7B two dies on 512 PC2-4300 (266 Mgts)
The southern bridge: ATI SB600
What's the problem?
At ATI was a little (if I am not mistaken, 4) audits SB600. In some there was a problem with the SMBus-controler. A subject old, actually, and as it was corrected program already and I will not recall.
Can you will recall? Southern bridge ATI/AMD SB600 the Version 00
And at me the stimulus will acquire your remarkable program
Random topics
